recipes

packages recipes for the <noname> package manager
Log | Files | Refs

Makefile.in (28451B)


      1 # Makefile.in generated by automake 1.16.1 from Makefile.am.
      2 # @configure_input@
      3 
      4 # Copyright (C) 1994-2018 Free Software Foundation, Inc.
      5 
      6 # This Makefile.in is free software; the Free Software Foundation
      7 # gives unlimited permission to copy and/or distribute it,
      8 # with or without modifications, as long as this notice is preserved.
      9 
     10 # This program is distributed in the hope that it will be useful,
     11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
     12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
     13 # PARTICULAR PURPOSE.
     14 
     15 @SET_MAKE@
     16 
     17 VPATH = @srcdir@
     18 am__is_gnu_make = { \
     19   if test -z '$(MAKELEVEL)'; then \
     20     false; \
     21   elif test -n '$(MAKE_HOST)'; then \
     22     true; \
     23   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
     24     true; \
     25   else \
     26     false; \
     27   fi; \
     28 }
     29 am__make_running_with_option = \
     30   case $${target_option-} in \
     31       ?) ;; \
     32       *) echo "am__make_running_with_option: internal error: invalid" \
     33               "target option '$${target_option-}' specified" >&2; \
     34          exit 1;; \
     35   esac; \
     36   has_opt=no; \
     37   sane_makeflags=$$MAKEFLAGS; \
     38   if $(am__is_gnu_make); then \
     39     sane_makeflags=$$MFLAGS; \
     40   else \
     41     case $$MAKEFLAGS in \
     42       *\\[\ \	]*) \
     43         bs=\\; \
     44         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
     45           | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
     46     esac; \
     47   fi; \
     48   skip_next=no; \
     49   strip_trailopt () \
     50   { \
     51     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
     52   }; \
     53   for flg in $$sane_makeflags; do \
     54     test $$skip_next = yes && { skip_next=no; continue; }; \
     55     case $$flg in \
     56       *=*|--*) continue;; \
     57         -*I) strip_trailopt 'I'; skip_next=yes;; \
     58       -*I?*) strip_trailopt 'I';; \
     59         -*O) strip_trailopt 'O'; skip_next=yes;; \
     60       -*O?*) strip_trailopt 'O';; \
     61         -*l) strip_trailopt 'l'; skip_next=yes;; \
     62       -*l?*) strip_trailopt 'l';; \
     63       -[dEDm]) skip_next=yes;; \
     64       -[JT]) skip_next=yes;; \
     65     esac; \
     66     case $$flg in \
     67       *$$target_option*) has_opt=yes; break;; \
     68     esac; \
     69   done; \
     70   test $$has_opt = yes
     71 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
     72 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
     73 pkgdatadir = $(datadir)/@DEFAGE@
     74 pkgincludedir = $(includedir)/@DEFAGE@
     75 pkglibdir = $(libdir)/@DEFAGE@
     76 pkglibexecdir = $(libexecdir)/@DEFAGE@
     77 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
     78 install_sh_DATA = $(install_sh) -c -m 644
     79 install_sh_PROGRAM = $(install_sh) -c
     80 install_sh_SCRIPT = $(install_sh) -c
     81 INSTALL_HEADER = $(INSTALL_DATA)
     82 transform = $(program_transform_name)
     83 NORMAL_INSTALL = :
     84 PRE_INSTALL = :
     85 POST_INSTALL = :
     86 NORMAL_UNINSTALL = :
     87 PRE_UNINSTALL = :
     88 POST_UNINSTALL = :
     89 build_triplet = @build@
     90 host_triplet = @host@
     91 target_triplet = @target@
     92 subdir = .
     93 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
     94 am__aclocal_m4_deps = $(top_srcdir)/config/ax_check_compile_flag.m4 \
     95 	$(top_srcdir)/config/ax_check_link_flag.m4 \
     96 	$(top_srcdir)/config/libtool.m4 \
     97 	$(top_srcdir)/config/ltoptions.m4 \
     98 	$(top_srcdir)/config/ltsugar.m4 \
     99 	$(top_srcdir)/config/ltversion.m4 \
    100 	$(top_srcdir)/config/lt~obsolete.m4 $(top_srcdir)/configure.ac
    101 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
    102 	$(ACLOCAL_M4)
    103 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
    104 	$(am__configure_deps) $(dist_doc_DATA) $(am__DIST_COMMON)
    105 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
    106  configure.lineno config.status.lineno
    107 mkinstalldirs = $(install_sh) -d
    108 CONFIG_HEADER = $(top_builddir)/include/config.h
    109 CONFIG_CLEAN_FILES =
    110 CONFIG_CLEAN_VPATH_FILES =
    111 AM_V_P = $(am__v_P_@AM_V@)
    112 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
    113 am__v_P_0 = false
    114 am__v_P_1 = :
    115 AM_V_GEN = $(am__v_GEN_@AM_V@)
    116 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
    117 am__v_GEN_0 = @echo "  GEN     " $@;
    118 am__v_GEN_1 = 
    119 AM_V_at = $(am__v_at_@AM_V@)
    120 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
    121 am__v_at_0 = @
    122 am__v_at_1 = 
    123 SOURCES =
    124 DIST_SOURCES =
    125 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
    126 	ctags-recursive dvi-recursive html-recursive info-recursive \
    127 	install-data-recursive install-dvi-recursive \
    128 	install-exec-recursive install-html-recursive \
    129 	install-info-recursive install-pdf-recursive \
    130 	install-ps-recursive install-recursive installcheck-recursive \
    131 	installdirs-recursive pdf-recursive ps-recursive \
    132 	tags-recursive uninstall-recursive
    133 am__can_run_installinfo = \
    134   case $$AM_UPDATE_INFO_DIR in \
    135     n|no|NO) false;; \
    136     *) (install-info --version) >/dev/null 2>&1;; \
    137   esac
    138 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
    139 am__vpath_adj = case $$p in \
    140     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    141     *) f=$$p;; \
    142   esac;
    143 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
    144 am__install_max = 40
    145 am__nobase_strip_setup = \
    146   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
    147 am__nobase_strip = \
    148   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
    149 am__nobase_list = $(am__nobase_strip_setup); \
    150   for p in $$list; do echo "$$p $$p"; done | \
    151   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
    152   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    153     if (++n[$$2] == $(am__install_max)) \
    154       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    155     END { for (dir in files) print dir, files[dir] }'
    156 am__base_list = \
    157   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
    158   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
    159 am__uninstall_files_from_dir = { \
    160   test -z "$$files" \
    161     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    162     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
    163          $(am__cd) "$$dir" && rm -f $$files; }; \
    164   }
    165 am__installdirs = "$(DESTDIR)$(docdir)"
    166 DATA = $(dist_doc_DATA)
    167 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
    168   distclean-recursive maintainer-clean-recursive
    169 am__recursive_targets = \
    170   $(RECURSIVE_TARGETS) \
    171   $(RECURSIVE_CLEAN_TARGETS) \
    172   $(am__extra_recursive_targets)
    173 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
    174 	cscope distdir distdir-am dist dist-all distcheck
    175 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
    176 # Read a list of newline-separated strings from the standard input,
    177 # and print each of them once, without duplicates.  Input order is
    178 # *not* preserved.
    179 am__uniquify_input = $(AWK) '\
    180   BEGIN { nonempty = 0; } \
    181   { items[$$0] = 1; nonempty = 1; } \
    182   END { if (nonempty) { for (i in items) print i; }; } \
    183 '
    184 # Make sure the list of sources is unique.  This is necessary because,
    185 # e.g., the same source file might be shared among _SOURCES variables
    186 # for different programs/libraries.
    187 am__define_uniq_tagged_files = \
    188   list='$(am__tagged_files)'; \
    189   unique=`for i in $$list; do \
    190     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
    191   done | $(am__uniquify_input)`
    192 ETAGS = etags
    193 CTAGS = ctags
    194 CSCOPE = cscope
    195 DIST_SUBDIRS = $(SUBDIRS)
    196 am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/config/compile \
    197 	$(top_srcdir)/config/config.guess \
    198 	$(top_srcdir)/config/config.sub \
    199 	$(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
    200 	$(top_srcdir)/config/missing $(top_srcdir)/include/config.h.in \
    201 	ChangeLog INSTALL config/compile config/config.guess \
    202 	config/config.sub config/install-sh config/ltmain.sh \
    203 	config/missing
    204 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
    205 distdir = $(DEFAGE)-$(VERSION)
    206 top_distdir = $(distdir)
    207 am__remove_distdir = \
    208   if test -d "$(distdir)"; then \
    209     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
    210       && rm -rf "$(distdir)" \
    211       || { sleep 5 && rm -rf "$(distdir)"; }; \
    212   else :; fi
    213 am__post_remove_distdir = $(am__remove_distdir)
    214 am__relativize = \
    215   dir0=`pwd`; \
    216   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
    217   sed_rest='s,^[^/]*/*,,'; \
    218   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
    219   sed_butlast='s,/*[^/]*$$,,'; \
    220   while test -n "$$dir1"; do \
    221     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    222     if test "$$first" != "."; then \
    223       if test "$$first" = ".."; then \
    224         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
    225         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
    226       else \
    227         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
    228         if test "$$first2" = "$$first"; then \
    229           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
    230         else \
    231           dir2="../$$dir2"; \
    232         fi; \
    233         dir0="$$dir0"/"$$first"; \
    234       fi; \
    235     fi; \
    236     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
    237   done; \
    238   reldir="$$dir2"
    239 GZIP_ENV = --best
    240 DIST_ARCHIVES = $(distdir).tar.xz
    241 DIST_TARGETS = dist-xz
    242 distuninstallcheck_listfiles = find . -type f -print
    243 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
    244   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
    245 distcleancheck_listfiles = find . -type f -print
    246 ACLOCAL = @ACLOCAL@
    247 AMTAR = @AMTAR@
    248 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
    249 AR = @AR@
    250 AUTOCONF = @AUTOCONF@
    251 AUTOHEADER = @AUTOHEADER@
    252 AUTOMAKE = @AUTOMAKE@
    253 AWK = @AWK@
    254 CC = @CC@
    255 CCDEPMODE = @CCDEPMODE@
    256 CFLAGS = @CFLAGS@
    257 CONFDIR = @CONFDIR@
    258 CPP = @CPP@
    259 CPPFLAGS = @CPPFLAGS@
    260 CYGPATH_W = @CYGPATH_W@
    261 DEFAULT_INCLUDES = @DEFAULT_INCLUDES@
    262 DEFS = @DEFS@
    263 DEPDIR = @DEPDIR@
    264 DLLTOOL = @DLLTOOL@
    265 DSYMUTIL = @DSYMUTIL@
    266 DUMPBIN = @DUMPBIN@
    267 ECHO_C = @ECHO_C@
    268 ECHO_N = @ECHO_N@
    269 ECHO_T = @ECHO_T@
    270 EGREP = @EGREP@
    271 EXEEXT = @EXEEXT@
    272 FGREP = @FGREP@
    273 GREP = @GREP@
    274 INSTALL = @INSTALL@
    275 INSTALL_DATA = @INSTALL_DATA@
    276 INSTALL_PROGRAM = @INSTALL_PROGRAM@
    277 INSTALL_SCRIPT = @INSTALL_SCRIPT@
    278 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
    279 LD = @LD@
    280 LDFLAGS = @LDFLAGS@
    281 LDPRELOAD = @LDPRELOAD@
    282 LIBOBJS = @LIBOBJS@
    283 LIBS = @LIBS@
    284 LIBTOOL = @LIBTOOL@
    285 LIBTOOL_DEPS = @LIBTOOL_DEPS@
    286 LIPO = @LIPO@
    287 LN_S = @LN_S@
    288 LTLIBOBJS = @LTLIBOBJS@
    289 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
    290 MAKEINFO = @MAKEINFO@
    291 MANIFEST_TOOL = @MANIFEST_TOOL@
    292 MKDIR_P = @MKDIR_P@
    293 NM = @NM@
    294 NMEDIT = @NMEDIT@
    295 OBJDUMP = @OBJDUMP@
    296 OBJEXT = @OBJEXT@
    297 OTOOL = @OTOOL@
    298 OTOOL64 = @OTOOL64@
    299 DEFAGE = @DEFAGE@
    300 DEFAGE_BUGREPORT = @DEFAGE_BUGREPORT@
    301 DEFAGE_NAME = @DEFAGE_NAME@
    302 DEFAGE_STRING = @DEFAGE_STRING@
    303 DEFAGE_TARNAME = @DEFAGE_TARNAME@
    304 DEFAGE_URL = @DEFAGE_URL@
    305 DEFAGE_VERSION = @DEFAGE_VERSION@
    306 PATH_SEPARATOR = @PATH_SEPARATOR@
    307 RANLIB = @RANLIB@
    308 SED = @SED@
    309 SET_MAKE = @SET_MAKE@
    310 SHELL = @SHELL@
    311 SHLIB_EXT = @SHLIB_EXT@
    312 STRIP = @STRIP@
    313 TESTLDFLAGS = @TESTLDFLAGS@
    314 TORSOCKSLDFLAGS = @TORSOCKSLDFLAGS@
    315 VERSION = @VERSION@
    316 abs_builddir = @abs_builddir@
    317 abs_srcdir = @abs_srcdir@
    318 abs_top_builddir = @abs_top_builddir@
    319 abs_top_srcdir = @abs_top_srcdir@
    320 ac_ct_AR = @ac_ct_AR@
    321 ac_ct_CC = @ac_ct_CC@
    322 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
    323 am__include = @am__include@
    324 am__leading_dot = @am__leading_dot@
    325 am__quote = @am__quote@
    326 am__tar = @am__tar@
    327 am__untar = @am__untar@
    328 bindir = @bindir@
    329 build = @build@
    330 build_alias = @build_alias@
    331 build_cpu = @build_cpu@
    332 build_os = @build_os@
    333 build_vendor = @build_vendor@
    334 builddir = @builddir@
    335 datadir = @datadir@
    336 datarootdir = @datarootdir@
    337 docdir = @docdir@
    338 dvidir = @dvidir@
    339 exec_prefix = @exec_prefix@
    340 host = @host@
    341 host_alias = @host_alias@
    342 host_cpu = @host_cpu@
    343 host_os = @host_os@
    344 host_vendor = @host_vendor@
    345 htmldir = @htmldir@
    346 includedir = @includedir@
    347 infodir = @infodir@
    348 install_sh = @install_sh@
    349 libdir = @libdir@
    350 libexecdir = @libexecdir@
    351 localedir = @localedir@
    352 localstatedir = @localstatedir@
    353 mandir = @mandir@
    354 mkdir_p = @mkdir_p@
    355 oldincludedir = @oldincludedir@
    356 pdfdir = @pdfdir@
    357 prefix = @prefix@
    358 program_transform_name = @program_transform_name@
    359 psdir = @psdir@
    360 sbindir = @sbindir@
    361 sharedstatedir = @sharedstatedir@
    362 srcdir = @srcdir@
    363 sysconfdir = @sysconfdir@
    364 target = @target@
    365 target_alias = @target_alias@
    366 target_cpu = @target_cpu@
    367 target_os = @target_os@
    368 target_vendor = @target_vendor@
    369 top_build_prefix = @top_build_prefix@
    370 top_builddir = @top_builddir@
    371 top_srcdir = @top_srcdir@
    372 ACLOCAL_AMFLAGS = -I config
    373 SUBDIRS = src doc tests extras
    374 dist_doc_DATA = ChangeLog
    375 EXTRA_DIST = gpl-2.0.txt extras/torsocks-bash_completion
    376 all: all-recursive
    377 
    378 .SUFFIXES:
    379 am--refresh: Makefile
    380 	@:
    381 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
    382 	@for dep in $?; do \
    383 	  case '$(am__configure_deps)' in \
    384 	    *$$dep*) \
    385 	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
    386 	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
    387 		&& exit 0; \
    388 	      exit 1;; \
    389 	  esac; \
    390 	done; \
    391 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
    392 	$(am__cd) $(top_srcdir) && \
    393 	  $(AUTOMAKE) --foreign Makefile
    394 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
    395 	@case '$?' in \
    396 	  *config.status*) \
    397 	    echo ' $(SHELL) ./config.status'; \
    398 	    $(SHELL) ./config.status;; \
    399 	  *) \
    400 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
    401 	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
    402 	esac;
    403 
    404 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
    405 	$(SHELL) ./config.status --recheck
    406 
    407 $(top_srcdir)/configure:  $(am__configure_deps)
    408 	$(am__cd) $(srcdir) && $(AUTOCONF)
    409 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
    410 	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
    411 $(am__aclocal_m4_deps):
    412 
    413 include/config.h: include/stamp-h1
    414 	@test -f $@ || rm -f include/stamp-h1
    415 	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) include/stamp-h1
    416 
    417 include/stamp-h1: $(top_srcdir)/include/config.h.in $(top_builddir)/config.status
    418 	@rm -f include/stamp-h1
    419 	cd $(top_builddir) && $(SHELL) ./config.status include/config.h
    420 $(top_srcdir)/include/config.h.in:  $(am__configure_deps) 
    421 	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
    422 	rm -f include/stamp-h1
    423 	touch $@
    424 
    425 distclean-hdr:
    426 	-rm -f include/config.h include/stamp-h1
    427 
    428 mostlyclean-libtool:
    429 	-rm -f *.lo
    430 
    431 clean-libtool:
    432 	-rm -rf .libs _libs
    433 
    434 distclean-libtool:
    435 	-rm -f libtool config.lt
    436 install-dist_docDATA: $(dist_doc_DATA)
    437 	@$(NORMAL_INSTALL)
    438 	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
    439 	if test -n "$$list"; then \
    440 	  echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
    441 	  $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
    442 	fi; \
    443 	for p in $$list; do \
    444 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
    445 	  echo "$$d$$p"; \
    446 	done | $(am__base_list) | \
    447 	while read files; do \
    448 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
    449 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
    450 	done
    451 
    452 uninstall-dist_docDATA:
    453 	@$(NORMAL_UNINSTALL)
    454 	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
    455 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
    456 	dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
    457 
    458 # This directory's subdirectories are mostly independent; you can cd
    459 # into them and run 'make' without going through this Makefile.
    460 # To change the values of 'make' variables: instead of editing Makefiles,
    461 # (1) if the variable is set in 'config.status', edit 'config.status'
    462 #     (which will cause the Makefiles to be regenerated when you run 'make');
    463 # (2) otherwise, pass the desired values on the 'make' command line.
    464 $(am__recursive_targets):
    465 	@fail=; \
    466 	if $(am__make_keepgoing); then \
    467 	  failcom='fail=yes'; \
    468 	else \
    469 	  failcom='exit 1'; \
    470 	fi; \
    471 	dot_seen=no; \
    472 	target=`echo $@ | sed s/-recursive//`; \
    473 	case "$@" in \
    474 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
    475 	  *) list='$(SUBDIRS)' ;; \
    476 	esac; \
    477 	for subdir in $$list; do \
    478 	  echo "Making $$target in $$subdir"; \
    479 	  if test "$$subdir" = "."; then \
    480 	    dot_seen=yes; \
    481 	    local_target="$$target-am"; \
    482 	  else \
    483 	    local_target="$$target"; \
    484 	  fi; \
    485 	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
    486 	  || eval $$failcom; \
    487 	done; \
    488 	if test "$$dot_seen" = "no"; then \
    489 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
    490 	fi; test -z "$$fail"
    491 
    492 ID: $(am__tagged_files)
    493 	$(am__define_uniq_tagged_files); mkid -fID $$unique
    494 tags: tags-recursive
    495 TAGS: tags
    496 
    497 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
    498 	set x; \
    499 	here=`pwd`; \
    500 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
    501 	  include_option=--etags-include; \
    502 	  empty_fix=.; \
    503 	else \
    504 	  include_option=--include; \
    505 	  empty_fix=; \
    506 	fi; \
    507 	list='$(SUBDIRS)'; for subdir in $$list; do \
    508 	  if test "$$subdir" = .; then :; else \
    509 	    test ! -f $$subdir/TAGS || \
    510 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
    511 	  fi; \
    512 	done; \
    513 	$(am__define_uniq_tagged_files); \
    514 	shift; \
    515 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
    516 	  test -n "$$unique" || unique=$$empty_fix; \
    517 	  if test $$# -gt 0; then \
    518 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
    519 	      "$$@" $$unique; \
    520 	  else \
    521 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
    522 	      $$unique; \
    523 	  fi; \
    524 	fi
    525 ctags: ctags-recursive
    526 
    527 CTAGS: ctags
    528 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
    529 	$(am__define_uniq_tagged_files); \
    530 	test -z "$(CTAGS_ARGS)$$unique" \
    531 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
    532 	     $$unique
    533 
    534 GTAGS:
    535 	here=`$(am__cd) $(top_builddir) && pwd` \
    536 	  && $(am__cd) $(top_srcdir) \
    537 	  && gtags -i $(GTAGS_ARGS) "$$here"
    538 cscope: cscope.files
    539 	test ! -s cscope.files \
    540 	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
    541 clean-cscope:
    542 	-rm -f cscope.files
    543 cscope.files: clean-cscope cscopelist
    544 cscopelist: cscopelist-recursive
    545 
    546 cscopelist-am: $(am__tagged_files)
    547 	list='$(am__tagged_files)'; \
    548 	case "$(srcdir)" in \
    549 	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
    550 	  *) sdir=$(subdir)/$(srcdir) ;; \
    551 	esac; \
    552 	for i in $$list; do \
    553 	  if test -f "$$i"; then \
    554 	    echo "$(subdir)/$$i"; \
    555 	  else \
    556 	    echo "$$sdir/$$i"; \
    557 	  fi; \
    558 	done >> $(top_builddir)/cscope.files
    559 
    560 distclean-tags:
    561 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
    562 	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
    563 
    564 distdir: $(BUILT_SOURCES)
    565 	$(MAKE) $(AM_MAKEFLAGS) distdir-am
    566 
    567 distdir-am: $(DISTFILES)
    568 	$(am__remove_distdir)
    569 	test -d "$(distdir)" || mkdir "$(distdir)"
    570 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
    571 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
    572 	list='$(DISTFILES)'; \
    573 	  dist_files=`for file in $$list; do echo $$file; done | \
    574 	  sed -e "s|^$$srcdirstrip/||;t" \
    575 	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
    576 	case $$dist_files in \
    577 	  */*) $(MKDIR_P) `echo "$$dist_files" | \
    578 			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
    579 			   sort -u` ;; \
    580 	esac; \
    581 	for file in $$dist_files; do \
    582 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
    583 	  if test -d $$d/$$file; then \
    584 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
    585 	    if test -d "$(distdir)/$$file"; then \
    586 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
    587 	    fi; \
    588 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
    589 	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
    590 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
    591 	    fi; \
    592 	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
    593 	  else \
    594 	    test -f "$(distdir)/$$file" \
    595 	    || cp -p $$d/$$file "$(distdir)/$$file" \
    596 	    || exit 1; \
    597 	  fi; \
    598 	done
    599 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
    600 	  if test "$$subdir" = .; then :; else \
    601 	    $(am__make_dryrun) \
    602 	      || test -d "$(distdir)/$$subdir" \
    603 	      || $(MKDIR_P) "$(distdir)/$$subdir" \
    604 	      || exit 1; \
    605 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
    606 	    $(am__relativize); \
    607 	    new_distdir=$$reldir; \
    608 	    dir1=$$subdir; dir2="$(top_distdir)"; \
    609 	    $(am__relativize); \
    610 	    new_top_distdir=$$reldir; \
    611 	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
    612 	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
    613 	    ($(am__cd) $$subdir && \
    614 	      $(MAKE) $(AM_MAKEFLAGS) \
    615 	        top_distdir="$$new_top_distdir" \
    616 	        distdir="$$new_distdir" \
    617 		am__remove_distdir=: \
    618 		am__skip_length_check=: \
    619 		am__skip_mode_fix=: \
    620 	        distdir) \
    621 	      || exit 1; \
    622 	  fi; \
    623 	done
    624 	-test -n "$(am__skip_mode_fix)" \
    625 	|| find "$(distdir)" -type d ! -perm -755 \
    626 		-exec chmod u+rwx,go+rx {} \; -o \
    627 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
    628 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
    629 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
    630 	|| chmod -R a+r "$(distdir)"
    631 dist-gzip: distdir
    632 	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
    633 	$(am__post_remove_distdir)
    634 
    635 dist-bzip2: distdir
    636 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
    637 	$(am__post_remove_distdir)
    638 
    639 dist-lzip: distdir
    640 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
    641 	$(am__post_remove_distdir)
    642 dist-xz: distdir
    643 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
    644 	$(am__post_remove_distdir)
    645 
    646 dist-tarZ: distdir
    647 	@echo WARNING: "Support for distribution archives compressed with" \
    648 		       "legacy program 'compress' is deprecated." >&2
    649 	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
    650 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
    651 	$(am__post_remove_distdir)
    652 
    653 dist-shar: distdir
    654 	@echo WARNING: "Support for shar distribution archives is" \
    655 	               "deprecated." >&2
    656 	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
    657 	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
    658 	$(am__post_remove_distdir)
    659 
    660 dist-zip: distdir
    661 	-rm -f $(distdir).zip
    662 	zip -rq $(distdir).zip $(distdir)
    663 	$(am__post_remove_distdir)
    664 
    665 dist dist-all:
    666 	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
    667 	$(am__post_remove_distdir)
    668 
    669 # This target untars the dist file and tries a VPATH configuration.  Then
    670 # it guarantees that the distribution is self-contained by making another
    671 # tarfile.
    672 distcheck: dist
    673 	case '$(DIST_ARCHIVES)' in \
    674 	*.tar.gz*) \
    675 	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
    676 	*.tar.bz2*) \
    677 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
    678 	*.tar.lz*) \
    679 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
    680 	*.tar.xz*) \
    681 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
    682 	*.tar.Z*) \
    683 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
    684 	*.shar.gz*) \
    685 	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
    686 	*.zip*) \
    687 	  unzip $(distdir).zip ;;\
    688 	esac
    689 	chmod -R a-w $(distdir)
    690 	chmod u+w $(distdir)
    691 	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
    692 	chmod a-w $(distdir)
    693 	test -d $(distdir)/_build || exit 0; \
    694 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
    695 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
    696 	  && am__cwd=`pwd` \
    697 	  && $(am__cd) $(distdir)/_build/sub \
    698 	  && ../../configure \
    699 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
    700 	    $(DISTCHECK_CONFIGURE_FLAGS) \
    701 	    --srcdir=../.. --prefix="$$dc_install_base" \
    702 	  && $(MAKE) $(AM_MAKEFLAGS) \
    703 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
    704 	  && $(MAKE) $(AM_MAKEFLAGS) check \
    705 	  && $(MAKE) $(AM_MAKEFLAGS) install \
    706 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
    707 	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
    708 	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
    709 	        distuninstallcheck \
    710 	  && chmod -R a-w "$$dc_install_base" \
    711 	  && ({ \
    712 	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
    713 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
    714 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
    715 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
    716 	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
    717 	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
    718 	  && rm -rf "$$dc_destdir" \
    719 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
    720 	  && rm -rf $(DIST_ARCHIVES) \
    721 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
    722 	  && cd "$$am__cwd" \
    723 	  || exit 1
    724 	$(am__post_remove_distdir)
    725 	@(echo "$(distdir) archives ready for distribution: "; \
    726 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
    727 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
    728 distuninstallcheck:
    729 	@test -n '$(distuninstallcheck_dir)' || { \
    730 	  echo 'ERROR: trying to run $@ with an empty' \
    731 	       '$$(distuninstallcheck_dir)' >&2; \
    732 	  exit 1; \
    733 	}; \
    734 	$(am__cd) '$(distuninstallcheck_dir)' || { \
    735 	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
    736 	  exit 1; \
    737 	}; \
    738 	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
    739 	   || { echo "ERROR: files left after uninstall:" ; \
    740 	        if test -n "$(DESTDIR)"; then \
    741 	          echo "  (check DESTDIR support)"; \
    742 	        fi ; \
    743 	        $(distuninstallcheck_listfiles) ; \
    744 	        exit 1; } >&2
    745 distcleancheck: distclean
    746 	@if test '$(srcdir)' = . ; then \
    747 	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
    748 	  exit 1 ; \
    749 	fi
    750 	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
    751 	  || { echo "ERROR: files left in build directory after distclean:" ; \
    752 	       $(distcleancheck_listfiles) ; \
    753 	       exit 1; } >&2
    754 check-am: all-am
    755 check: check-recursive
    756 all-am: Makefile $(DATA)
    757 installdirs: installdirs-recursive
    758 installdirs-am:
    759 	for dir in "$(DESTDIR)$(docdir)"; do \
    760 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
    761 	done
    762 install: install-recursive
    763 install-exec: install-exec-recursive
    764 install-data: install-data-recursive
    765 uninstall: uninstall-recursive
    766 
    767 install-am: all-am
    768 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
    769 
    770 installcheck: installcheck-recursive
    771 install-strip:
    772 	if test -z '$(STRIP)'; then \
    773 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
    774 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
    775 	      install; \
    776 	else \
    777 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
    778 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
    779 	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
    780 	fi
    781 mostlyclean-generic:
    782 
    783 clean-generic:
    784 
    785 distclean-generic:
    786 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
    787 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
    788 
    789 maintainer-clean-generic:
    790 	@echo "This command is intended for maintainers to use"
    791 	@echo "it deletes files that may require special tools to rebuild."
    792 clean: clean-recursive
    793 
    794 clean-am: clean-generic clean-libtool mostlyclean-am
    795 
    796 distclean: distclean-recursive
    797 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
    798 	-rm -f Makefile
    799 distclean-am: clean-am distclean-generic distclean-hdr \
    800 	distclean-libtool distclean-tags
    801 
    802 dvi: dvi-recursive
    803 
    804 dvi-am:
    805 
    806 html: html-recursive
    807 
    808 html-am:
    809 
    810 info: info-recursive
    811 
    812 info-am:
    813 
    814 install-data-am: install-dist_docDATA
    815 
    816 install-dvi: install-dvi-recursive
    817 
    818 install-dvi-am:
    819 
    820 install-exec-am:
    821 
    822 install-html: install-html-recursive
    823 
    824 install-html-am:
    825 
    826 install-info: install-info-recursive
    827 
    828 install-info-am:
    829 
    830 install-man:
    831 
    832 install-pdf: install-pdf-recursive
    833 
    834 install-pdf-am:
    835 
    836 install-ps: install-ps-recursive
    837 
    838 install-ps-am:
    839 
    840 installcheck-am:
    841 
    842 maintainer-clean: maintainer-clean-recursive
    843 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
    844 	-rm -rf $(top_srcdir)/autom4te.cache
    845 	-rm -f Makefile
    846 maintainer-clean-am: distclean-am maintainer-clean-generic
    847 
    848 mostlyclean: mostlyclean-recursive
    849 
    850 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
    851 
    852 pdf: pdf-recursive
    853 
    854 pdf-am:
    855 
    856 ps: ps-recursive
    857 
    858 ps-am:
    859 
    860 uninstall-am: uninstall-dist_docDATA
    861 
    862 .MAKE: $(am__recursive_targets) install-am install-strip
    863 
    864 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
    865 	am--refresh check check-am clean clean-cscope clean-generic \
    866 	clean-libtool cscope cscopelist-am ctags ctags-am dist \
    867 	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
    868 	dist-xz dist-zip distcheck distclean distclean-generic \
    869 	distclean-hdr distclean-libtool distclean-tags distcleancheck \
    870 	distdir distuninstallcheck dvi dvi-am html html-am info \
    871 	info-am install install-am install-data install-data-am \
    872 	install-dist_docDATA install-dvi install-dvi-am install-exec \
    873 	install-exec-am install-html install-html-am install-info \
    874 	install-info-am install-man install-pdf install-pdf-am \
    875 	install-ps install-ps-am install-strip installcheck \
    876 	installcheck-am installdirs installdirs-am maintainer-clean \
    877 	maintainer-clean-generic mostlyclean mostlyclean-generic \
    878 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
    879 	uninstall-am uninstall-dist_docDATA
    880 
    881 .PRECIOUS: Makefile
    882 
    883 
    884 # Tell versions [3.59,3.63) of GNU make to not export all variables.
    885 # Otherwise a system limit (for SysV at least) may be exceeded.
    886 .NOEXPORT: